基于溅射板馈源的Ka频段卫星通信天线设计
Design of Ka-band satellite communication antenna with splash-plate feed
  
DOI:
中文关键词:  卫星通信;溅射板馈源;环焦天线;Ka频段;赋形
英文关键词:satellite communications;splash plate feed;ring focus antenna;Ka band;surface forming
基金项目:国家自然科学基金(61701260)和南京邮电大学基金(NY214144,NY215073)资助项目
作者单位
赵来定 南京邮电大学 通信与信息工程学院,江苏南京210003 
白晓东 卫星通信与导航协同创新中心,江苏南京210007 
郝然 南京邮电大学 贝尔英才学院,江苏南京210023 
李锐 南京邮电大学 电子与光学工程学院 微电子学院,江苏南京210023 
摘要点击次数: 2071
全文下载次数: 1505
中文摘要:
      提出了一种Ka频段卫星通信地球站赋形天线的设计方法。该天线主面为环焦抛物面,采用溅射板式馈源。初级馈源、介质材料及副面通过胶粘接。文中理论推导了赋形等关键设计公式。根据设计结果进行天线样机加工,并进行了方向图测试。测试结果证明该1 m口径天线增益高达47 dBi,且天线性能与理论仿真基本吻合,表明该设计方法有效可行。
英文摘要:
      A design method for Ka band satellite communication earth station antenna is proposed.The main reflector of the antenna is a ring focus parabolic surface with a splash plate feed.The primary feed,dielectric material and the sub reflector of antenna are bonded by glue.The key design formulas are theoretically induced,such as shaping.Antenna prototypes are processed based on the design results and antenna patterns are tested.The test results proves that the gain of the antenna with 1 m caliber is as high as 47 dBi,and the performance of antenna is in good agreement with that of the theoretical simulation,indicating that the design method is effective and feasible.
查看全文  查看/发表评论  下载PDF阅读器

你是第3762119访问者
版权所有《南京邮电大学学报(自然科学版)》编辑部
Tel:86-25-85866913 E-mail:xb@njupt.edu.cn
技术支持:本系统由北京勤云科技发展有限公司设计

欢迎访问《南京邮电大学学报(自然科学版)》编辑部!